Share this page

Learn X in Y minutes

Where X=Python

Python was created by Guido van Rossum in the early 90s. It is now one of the most popular languages in existence. I fell in love with Python for its syntactic clarity. It’s basically executable pseudocode.

# Single line comments start with a number symbol.

""" Multiline strings can be written
    using three "s, and are often used
    as documentation.
"""

####################################################
## 1. Primitive Datatypes and Operators
####################################################

# You have numbers
3  # => 3

# Math is what you would expect
1 + 1   # => 2
8 - 1   # => 7
10 * 2  # => 20
35 / 5  # => 7.0

# Floor division rounds towards negative infinity
5 // 3       # => 1
-5 // 3      # => -2
5.0 // 3.0   # => 1.0  # works on floats too
-5.0 // 3.0  # => -2.0

# The result of division is always a float
10.0 / 3  # => 3.3333333333333335

# Modulo operation
7 % 3   # => 1
# i % j have the same sign as j, unlike C
-7 % 3  # => 2

# Exponentiation (x**y, x to the yth power)
2**3  # => 8

# Enforce precedence with parentheses
1 + 3 * 2    # => 7
(1 + 3) * 2  # => 8

# Boolean values are primitives (Note: the capitalization)
True   # => True
False  # => False

# negate with not
not True   # => False
not False  # => True

# Boolean Operators
# Note "and" and "or" are case-sensitive
True and False  # => False
False or True   # => True

# True and False are actually 1 and 0 but with different keywords
True + True  # => 2
True * 8     # => 8
False - 5    # => -5

# Comparison operators look at the numerical value of True and False
0 == False   # => True
2 > True     # => True
2 == True    # => False
-5 != False  # => True

# None, 0, and empty strings/lists/dicts/tuples/sets all evaluate to False.
# All other values are True
bool(0)      # => False
bool("")     # => False
bool([])     # => False
bool({})     # => False
bool(())     # => False
bool(set())  # => False
bool(4)      # => True
bool(-6)     # => True

# Using boolean logical operators on ints casts them to booleans for evaluation,
# but their non-cast value is returned. Don't mix up with bool(ints) and bitwise
# and/or (&,|)
bool(0)   # => False
bool(2)   # => True
0 and 2   # => 0
bool(-5)  # => True
bool(2)   # => True
-5 or 0   # => -5

# Equality is ==
1 == 1  # => True
2 == 1  # => False

# Inequality is !=
1 != 1  # => False
2 != 1  # => True

# More comparisons
1 < 10  # => True
1 > 10  # => False
2 <= 2  # => True
2 >= 2  # => True

# Seeing whether a value is in a range
1 < 2 and 2 < 3  # => True
2 < 3 and 3 < 2  # => False
# Chaining makes this look nicer
1 < 2 < 3  # => True
2 < 3 < 2  # => False

# (is vs. ==) is checks if two variables refer to the same object, but == checks
# if the objects pointed to have the same values.
a = [1, 2, 3, 4]  # Point a at a new list, [1, 2, 3, 4]
b = a             # Point b at what a is pointing to
b is a            # => True, a and b refer to the same object
b == a            # => True, a's and b's objects are equal
b = [1, 2, 3, 4]  # Point b at a new list, [1, 2, 3, 4]
b is a            # => False, a and b do not refer to the same object
b == a            # => True, a's and b's objects are equal

# Strings are created with " or '
"This is a string."
'This is also a string.'

# Strings can be added too
"Hello " + "world!"  # => "Hello world!"
# String literals (but not variables) can be concatenated without using '+'
"Hello " "world!"    # => "Hello world!"

# A string can be treated like a list of characters
"Hello world!"[0]  # => 'H'

# You can find the length of a string
len("This is a string")  # => 16

# Since Python 3.6, you can use f-strings or formatted string literals.
name = "Reiko"
f"She said her name is {name}."  # => "She said her name is Reiko"
# Any valid Python expression inside these braces is returned to the string.
f"{name} is {len(name)} characters long."  # => "Reiko is 5 characters long."

# None is an object
None  # => None

# Don't use the equality "==" symbol to compare objects to None
# Use "is" instead. This checks for equality of object identity.
"etc" is None  # => False
None is None   # => True

####################################################
## 2. Variables and Collections
####################################################

# Python has a print function
print("I'm Python. Nice to meet you!")  # => I'm Python. Nice to meet you!

# By default the print function also prints out a newline at the end.
# Use the optional argument end to change the end string.
print("Hello, World", end="!")  # => Hello, World!

# Simple way to get input data from console
input_string_var = input("Enter some data: ")  # Returns the data as a string

# There are no declarations, only assignments.
# Convention in naming variables is snake_case style
some_var = 5
some_var  # => 5

# Accessing a previously unassigned variable is an exception.
# See Control Flow to learn more about exception handling.
some_unknown_var  # Raises a NameError

# if can be used as an expression
# Equivalent of C's '?:' ternary operator
"yay!" if 0 > 1 else "nay!"  # => "nay!"

# Lists store sequences
li = []
# You can start with a prefilled list
other_li = [4, 5, 6]

# Add stuff to the end of a list with append
li.append(1)    # li is now [1]
li.append(2)    # li is now [1, 2]
li.append(4)    # li is now [1, 2, 4]
li.append(3)    # li is now [1, 2, 4, 3]
# Remove from the end with pop
li.pop()        # => 3 and li is now [1, 2, 4]
# Let's put it back
li.append(3)    # li is now [1, 2, 4, 3] again.

# Access a list like you would any array
li[0]   # => 1
# Look at the last element
li[-1]  # => 3

# Looking out of bounds is an IndexError
li[4]  # Raises an IndexError

# You can look at ranges with slice syntax.
# The start index is included, the end index is not
# (It's a closed/open range for you mathy types.)
li[1:3]   # Return list from index 1 to 3 => [2, 4]
li[2:]    # Return list starting from index 2 => [4, 3]
li[:3]    # Return list from beginning until index 3  => [1, 2, 4]
li[::2]   # Return list selecting elements with a step size of 2 => [1, 4]
li[::-1]  # Return list in reverse order => [3, 4, 2, 1]
# Use any combination of these to make advanced slices
# li[start:end:step]

# Make a one layer deep copy using slices
li2 = li[:]  # => li2 = [1, 2, 4, 3] but (li2 is li) will result in false.

# Remove arbitrary elements from a list with "del"
del li[2]  # li is now [1, 2, 3]

# Remove first occurrence of a value
li.remove(2)  # li is now [1, 3]
li.remove(2)  # Raises a ValueError as 2 is not in the list

# Insert an element at a specific index
li.insert(1, 2)  # li is now [1, 2, 3] again

# Get the index of the first item found matching the argument
li.index(2)  # => 1
li.index(4)  # Raises a ValueError as 4 is not in the list

# You can add lists
# Note: values for li and for other_li are not modified.
li + other_li  # => [1, 2, 3, 4, 5, 6]

# Concatenate lists with "extend()"
li.extend(other_li)  # Now li is [1, 2, 3, 4, 5, 6]

# Check for existence in a list with "in"
1 in li  # => True

# Examine the length with "len()"
len(li)  # => 6


# Tuples are like lists but are immutable.
tup = (1, 2, 3)
tup[0]      # => 1
tup[0] = 3  # Raises a TypeError

# Note that a tuple of length one has to have a comma after the last element but
# tuples of other lengths, even zero, do not.
type((1))   # => <class 'int'>
type((1,))  # => <class 'tuple'>
type(())    # => <class 'tuple'>

# You can do most of the list operations on tuples too
len(tup)         # => 3
tup + (4, 5, 6)  # => (1, 2, 3, 4, 5, 6)
tup[:2]          # => (1, 2)
2 in tup         # => True

# You can unpack tuples (or lists) into variables
a, b, c = (1, 2, 3)  # a is now 1, b is now 2 and c is now 3
# You can also do extended unpacking
a, *b, c = (1, 2, 3, 4)  # a is now 1, b is now [2, 3] and c is now 4
# Tuples are created by default if you leave out the parentheses
d, e, f = 4, 5, 6  # tuple 4, 5, 6 is unpacked into variables d, e and f
# respectively such that d = 4, e = 5 and f = 6
# Now look how easy it is to swap two values
e, d = d, e  # d is now 5 and e is now 4


# Dictionaries store mappings from keys to values
empty_dict = {}
# Here is a prefilled dictionary
filled_dict = {"one": 1, "two": 2, "three": 3}

# Note keys for dictionaries have to be immutable types. This is to ensure that
# the key can be converted to a constant hash value for quick look-ups.
# Immutable types include ints, floats, strings, tuples.
invalid_dict = {[1,2,3]: "123"}  # => Yield a TypeError: unhashable type: 'list'
valid_dict = {(1,2,3):[1,2,3]}   # Values can be of any type, however.

# Look up values with []
filled_dict["one"]  # => 1

# Get all keys as an iterable with "keys()". We need to wrap the call in list()
# to turn it into a list. We'll talk about those later.  Note - for Python
# versions <3.7, dictionary key ordering is not guaranteed. Your results might
# not match the example below exactly. However, as of Python 3.7, dictionary
# items maintain the order at which they are inserted into the dictionary.
list(filled_dict.keys())  # => ["three", "two", "one"] in Python <3.7
list(filled_dict.keys())  # => ["one", "two", "three"] in Python 3.7+


# Get all values as an iterable with "values()". Once again we need to wrap it
# in list() to get it out of the iterable. Note - Same as above regarding key
# ordering.
list(filled_dict.values())  # => [3, 2, 1]  in Python <3.7
list(filled_dict.values())  # => [1, 2, 3] in Python 3.7+

# Check for existence of keys in a dictionary with "in"
"one" in filled_dict  # => True
1 in filled_dict      # => False

# Looking up a non-existing key is a KeyError
filled_dict["four"]  # KeyError

# Use "get()" method to avoid the KeyError
filled_dict.get("one")      # => 1
filled_dict.get("four")     # => None
# The get method supports a default argument when the value is missing
filled_dict.get("one", 4)   # => 1
filled_dict.get("four", 4)  # => 4

# "setdefault()" inserts into a dictionary only if the given key isn't present
filled_dict.setdefault("five", 5)  # filled_dict["five"] is set to 5
filled_dict.setdefault("five", 6)  # filled_dict["five"] is still 5

# Adding to a dictionary
filled_dict.update({"four":4})  # => {"one": 1, "two": 2, "three": 3, "four": 4}
filled_dict["four"] = 4         # another way to add to dict

# Remove keys from a dictionary with del
del filled_dict["one"]  # Removes the key "one" from filled dict

# From Python 3.5 you can also use the additional unpacking options
{"a": 1, **{"b": 2}}  # => {'a': 1, 'b': 2}
{"a": 1, **{"a": 2}}  # => {'a': 2}


# Sets store ... well sets
empty_set = set()
# Initialize a set with a bunch of values.
some_set = {1, 1, 2, 2, 3, 4}  # some_set is now {1, 2, 3, 4}

# Similar to keys of a dictionary, elements of a set have to be immutable.
invalid_set = {[1], 1}  # => Raises a TypeError: unhashable type: 'list'
valid_set = {(1,), 1}

# Add one more item to the set
filled_set = some_set
filled_set.add(5)  # filled_set is now {1, 2, 3, 4, 5}
# Sets do not have duplicate elements
filled_set.add(5)  # it remains as before {1, 2, 3, 4, 5}

# Do set intersection with &
other_set = {3, 4, 5, 6}
filled_set & other_set  # => {3, 4, 5}

# Do set union with |
filled_set | other_set  # => {1, 2, 3, 4, 5, 6}

# Do set difference with -
{1, 2, 3, 4} - {2, 3, 5}  # => {1, 4}

# Do set symmetric difference with ^
{1, 2, 3, 4} ^ {2, 3, 5}  # => {1, 4, 5}

# Check if set on the left is a superset of set on the right
{1, 2} >= {1, 2, 3}  # => False

# Check if set on the left is a subset of set on the right
{1, 2} <= {1, 2, 3}  # => True

# Check for existence in a set with in
2 in filled_set   # => True
10 in filled_set  # => False

# Make a one layer deep copy
filled_set = some_set.copy()  # filled_set is {1, 2, 3, 4, 5}
filled_set is some_set        # => False


####################################################
## 3. Control Flow and Iterables
####################################################

# Let's just make a variable
some_var = 5

# Here is an if statement. Indentation is significant in Python!
# Convention is to use four spaces, not tabs.
# This prints "some_var is smaller than 10"
if some_var > 10:
    print("some_var is totally bigger than 10.")
elif some_var < 10:    # This elif clause is optional.
    print("some_var is smaller than 10.")
else:                  # This is optional too.
    print("some_var is indeed 10.")


"""
For loops iterate over lists
prints:
    dog is a mammal
    cat is a mammal
    mouse is a mammal
"""
for animal in ["dog", "cat", "mouse"]:
    # You can use format() to interpolate formatted strings
    print("{} is a mammal".format(animal))

"""
"range(number)" returns an iterable of numbers
from zero up to (but excluding) the given number
prints:
    0
    1
    2
    3
"""
for i in range(4):
    print(i)

"""
"range(lower, upper)" returns an iterable of numbers
from the lower number to the upper number
prints:
    4
    5
    6
    7
"""
for i in range(4, 8):
    print(i)

"""
"range(lower, upper, step)" returns an iterable of numbers
from the lower number to the upper number, while incrementing
by step. If step is not indicated, the default value is 1.
prints:
    4
    6
"""
for i in range(4, 8, 2):
    print(i)

"""
Loop over a list to retrieve both the index and the value of each list item:
    0 dog
    1 cat
    2 mouse
"""
animals = ["dog", "cat", "mouse"]
for i, value in enumerate(animals):
    print(i, value)

"""
While loops go until a condition is no longer met.
prints:
    0
    1
    2
    3
"""
x = 0
while x < 4:
    print(x)
    x += 1  # Shorthand for x = x + 1

# Handle exceptions with a try/except block
try:
    # Use "raise" to raise an error
    raise IndexError("This is an index error")
except IndexError as e:
    pass                 # Refrain from this, provide a recovery (next example).
except (TypeError, NameError):
    pass                 # Multiple exceptions can be processed jointly.
else:                    # Optional clause to the try/except block. Must follow
                         # all except blocks.
    print("All good!")   # Runs only if the code in try raises no exceptions
finally:                 # Execute under all circumstances
    print("We can clean up resources here")

# Instead of try/finally to cleanup resources you can use a with statement
with open("myfile.txt") as f:
    for line in f:
        print(line)

# Writing to a file
contents = {"aa": 12, "bb": 21}
with open("myfile1.txt", "w") as file:
    file.write(str(contents))        # writes a string to a file

import json
with open("myfile2.txt", "w") as file:
    file.write(json.dumps(contents))  # writes an object to a file

# Reading from a file
with open("myfile1.txt") as file:
    contents = file.read()           # reads a string from a file
print(contents)
# print: {"aa": 12, "bb": 21}

with open("myfile2.txt", "r") as file:
    contents = json.load(file)       # reads a json object from a file
print(contents)
# print: {"aa": 12, "bb": 21}


# Python offers a fundamental abstraction called the Iterable.
# An iterable is an object that can be treated as a sequence.
# The object returned by the range function, is an iterable.

filled_dict = {"one": 1, "two": 2, "three": 3}
our_iterable = filled_dict.keys()
print(our_iterable)  # => dict_keys(['one', 'two', 'three']). This is an object
                     # that implements our Iterable interface.

# We can loop over it.
for i in our_iterable:
    print(i)  # Prints one, two, three

# However we cannot address elements by index.
our_iterable[1]  # Raises a TypeError

# An iterable is an object that knows how to create an iterator.
our_iterator = iter(our_iterable)

# Our iterator is an object that can remember the state as we traverse through
# it. We get the next object with "next()".
next(our_iterator)  # => "one"

# It maintains state as we iterate.
next(our_iterator)  # => "two"
next(our_iterator)  # => "three"

# After the iterator has returned all of its data, it raises a
# StopIteration exception
next(our_iterator)  # Raises StopIteration

# We can also loop over it, in fact, "for" does this implicitly!
our_iterator = iter(our_iterable)
for i in our_iterator:
    print(i)  # Prints one, two, three

# You can grab all the elements of an iterable or iterator by call of list().
list(our_iterable)  # => Returns ["one", "two", "three"]
list(our_iterator)  # => Returns [] because state is saved


####################################################
## 4. Functions
####################################################

# Use "def" to create new functions
def add(x, y):
    print("x is {} and y is {}".format(x, y))
    return x + y  # Return values with a return statement

# Calling functions with parameters
add(5, 6)  # => prints out "x is 5 and y is 6" and returns 11

# Another way to call functions is with keyword arguments
add(y=6, x=5)  # Keyword arguments can arrive in any order.

# You can define functions that take a variable number of
# positional arguments
def varargs(*args):
    return args

varargs(1, 2, 3)  # => (1, 2, 3)

# You can define functions that take a variable number of
# keyword arguments, as well
def keyword_args(**kwargs):
    return kwargs

# Let's call it to see what happens
keyword_args(big="foot", loch="ness")  # => {"big": "foot", "loch": "ness"}


# You can do both at once, if you like
def all_the_args(*args, **kwargs):
    print(args)
    print(kwargs)
"""
all_the_args(1, 2, a=3, b=4) prints:
    (1, 2)
    {"a": 3, "b": 4}
"""

# When calling functions, you can do the opposite of args/kwargs!
# Use * to expand args (tuples) and use ** to expand kwargs (dictionaries).
args = (1, 2, 3, 4)
kwargs = {"a": 3, "b": 4}
all_the_args(*args)            # equivalent: all_the_args(1, 2, 3, 4)
all_the_args(**kwargs)         # equivalent: all_the_args(a=3, b=4)
all_the_args(*args, **kwargs)  # equivalent: all_the_args(1, 2, 3, 4, a=3, b=4)

# Returning multiple values (with tuple assignments)
def swap(x, y):
    return y, x  # Return multiple values as a tuple without the parenthesis.
                 # (Note: parenthesis have been excluded but can be included)

x = 1
y = 2
x, y = swap(x, y)     # => x = 2, y = 1
# (x, y) = swap(x,y)  # Again the use of parenthesis is optional.

# global scope
x = 5

def set_x(num):
    # local scope begins here
    # local var x not the same as global var x
    x = num    # => 43
    print(x)   # => 43

def set_global_x(num):
    # global indicates that particular var lives in the global scope
    global x
    print(x)   # => 5
    x = num    # global var x is now set to 6
    print(x)   # => 6

set_x(43)
set_global_x(6)
"""
prints:
    43
    5
    6
"""


# Python has first class functions
def create_adder(x):
    def adder(y):
        return x + y
    return adder

add_10 = create_adder(10)
add_10(3)   # => 13

# Closures in nested functions:
# We can use the nonlocal keyword to work with variables in nested scope which shouldn't be declared in the inner functions.
def create_avg():
    total = 0
    count = 0
    def avg(n):
        nonlocal total, count
        total += n
        count += 1
        return total/count
    return avg
avg = create_avg()
avg(3)  # => 3.0
avg(5)  # (3+5)/2 => 4.0
avg(7)  # (8+7)/3 => 5.0

# There are also anonymous functions
(lambda x: x > 2)(3)                  # => True
(lambda x, y: x ** 2 + y ** 2)(2, 1)  # => 5

# There are built-in higher order functions
list(map(add_10, [1, 2, 3]))          # => [11, 12, 13]
list(map(max, [1, 2, 3], [4, 2, 1]))  # => [4, 2, 3]

list(filter(lambda x: x > 5, [3, 4, 5, 6, 7]))  # => [6, 7]

# We can use list comprehensions for nice maps and filters
# List comprehension stores the output as a list (which itself may be nested).
[add_10(i) for i in [1, 2, 3]]         # => [11, 12, 13]
[x for x in [3, 4, 5, 6, 7] if x > 5]  # => [6, 7]

# You can construct set and dict comprehensions as well.
{x for x in "abcddeef" if x not in "abc"}  # => {'d', 'e', 'f'}
{x: x**2 for x in range(5)}  # => {0: 0, 1: 1, 2: 4, 3: 9, 4: 16}


####################################################
## 5. Modules
####################################################

# You can import modules
import math
print(math.sqrt(16))  # => 4.0

# You can get specific functions from a module
from math import ceil, floor
print(ceil(3.7))   # => 4
print(floor(3.7))  # => 3

# You can import all functions from a module.
# Warning: this is not recommended
from math import *

# You can shorten module names
import math as m
math.sqrt(16) == m.sqrt(16)  # => True

# Python modules are just ordinary Python files. You
# can write your own, and import them. The name of the
# module is the same as the name of the file.

# You can find out which functions and attributes
# are defined in a module.
import math
dir(math)

# If you have a Python script named math.py in the same
# folder as your current script, the file math.py will
# be loaded instead of the built-in Python module.
# This happens because the local folder has priority
# over Python's built-in libraries.


####################################################
## 6. Classes
####################################################

# We use the "class" statement to create a class
class Human:

    # A class attribute. It is shared by all instances of this class
    species = "H. sapiens"

    # Basic initializer, this is called when this class is instantiated.
    # Note that the double leading and trailing underscores denote objects
    # or attributes that are used by Python but that live in user-controlled
    # namespaces. Methods(or objects or attributes) like: __init__, __str__,
    # __repr__ etc. are called special methods (or sometimes called dunder
    # methods). You should not invent such names on your own.
    def __init__(self, name):
        # Assign the argument to the instance's name attribute
        self.name = name

        # Initialize property
        self._age = 0   # the leading underscore indicates the "age" property is
                        # intended to be used internally
                        # do not rely on this to be enforced: it's a hint to other devs

    # An instance method. All methods take "self" as the first argument
    def say(self, msg):
        print("{name}: {message}".format(name=self.name, message=msg))

    # Another instance method
    def sing(self):
        return "yo... yo... microphone check... one two... one two..."

    # A class method is shared among all instances
    # They are called with the calling class as the first argument
    @classmethod
    def get_species(cls):
        return cls.species

    # A static method is called without a class or instance reference
    @staticmethod
    def grunt():
        return "*grunt*"

    # A property is just like a getter.
    # It turns the method age() into a read-only attribute of the same name.
    # There's no need to write trivial getters and setters in Python, though.
    @property
    def age(self):
        return self._age

    # This allows the property to be set
    @age.setter
    def age(self, age):
        self._age = age

    # This allows the property to be deleted
    @age.deleter
    def age(self):
        del self._age


# When a Python interpreter reads a source file it executes all its code.
# This __name__ check makes sure this code block is only executed when this
# module is the main program.
if __name__ == "__main__":
    # Instantiate a class
    i = Human(name="Ian")
    i.say("hi")                     # "Ian: hi"
    j = Human("Joel")
    j.say("hello")                  # "Joel: hello"
    # i and j are instances of type Human; i.e., they are Human objects.

    # Call our class method
    i.say(i.get_species())          # "Ian: H. sapiens"
    # Change the shared attribute
    Human.species = "H. neanderthalensis"
    i.say(i.get_species())          # => "Ian: H. neanderthalensis"
    j.say(j.get_species())          # => "Joel: H. neanderthalensis"

    # Call the static method
    print(Human.grunt())            # => "*grunt*"

    # Static methods can be called by instances too
    print(i.grunt())                # => "*grunt*"

    # Update the property for this instance
    i.age = 42
    # Get the property
    i.say(i.age)                    # => "Ian: 42"
    j.say(j.age)                    # => "Joel: 0"
    # Delete the property
    del i.age
    # i.age                         # => this would raise an AttributeError


####################################################
## 6.1 Inheritance
####################################################

# Inheritance allows new child classes to be defined that inherit methods and
# variables from their parent class.

# Using the Human class defined above as the base or parent class, we can
# define a child class, Superhero, which inherits variables like "species",
# "name", and "age", as well as methods, like "sing" and "grunt"
# from the Human class, but can also have its own unique properties.

# To take advantage of modularization by file you could place the classes above
# in their own files, say, human.py

# To import functions from other files use the following format
# from "filename-without-extension" import "function-or-class"

from human import Human


# Specify the parent class(es) as parameters to the class definition
class Superhero(Human):

    # If the child class should inherit all of the parent's definitions without
    # any modifications, you can just use the "pass" keyword (and nothing else)
    # but in this case it is commented out to allow for a unique child class:
    # pass

    # Child classes can override their parents' attributes
    species = "Superhuman"

    # Children automatically inherit their parent class's constructor including
    # its arguments, but can also define additional arguments or definitions
    # and override its methods such as the class constructor.
    # This constructor inherits the "name" argument from the "Human" class and
    # adds the "superpower" and "movie" arguments:
    def __init__(self, name, movie=False,
                 superpowers=["super strength", "bulletproofing"]):

        # add additional class attributes:
        self.fictional = True
        self.movie = movie
        # be aware of mutable default values, since defaults are shared
        self.superpowers = superpowers

        # The "super" function lets you access the parent class's methods
        # that are overridden by the child, in this case, the __init__ method.
        # This calls the parent class constructor:
        super().__init__(name)

    # override the sing method
    def sing(self):
        return "Dun, dun, DUN!"

    # add an additional instance method
    def boast(self):
        for power in self.superpowers:
            print("I wield the power of {pow}!".format(pow=power))


if __name__ == "__main__":
    sup = Superhero(name="Tick")

    # Instance type checks
    if isinstance(sup, Human):
        print("I am human")
    if type(sup) is Superhero:
        print("I am a superhero")

    # Get the "Method Resolution Order" used by both getattr() and super()
    # (the order in which classes are searched for an attribute or method)
    # This attribute is dynamic and can be updated
    print(Superhero.__mro__)    # => (<class '__main__.Superhero'>,
                                # => <class 'human.Human'>, <class 'object'>)

    # Calls parent method but uses its own class attribute
    print(sup.get_species())    # => Superhuman

    # Calls overridden method
    print(sup.sing())           # => Dun, dun, DUN!

    # Calls method from Human
    sup.say("Spoon")            # => Tick: Spoon

    # Call method that exists only in Superhero
    sup.boast()                 # => I wield the power of super strength!
                                # => I wield the power of bulletproofing!

    # Inherited class attribute
    sup.age = 31
    print(sup.age)              # => 31

    # Attribute that only exists within Superhero
    print("Am I Oscar eligible? " + str(sup.movie))

####################################################
## 6.2 Multiple Inheritance
####################################################


# Another class definition
# bat.py
class Bat:

    species = "Baty"

    def __init__(self, can_fly=True):
        self.fly = can_fly

    # This class also has a say method
    def say(self, msg):
        msg = "... ... ..."
        return msg

    # And its own method as well
    def sonar(self):
        return "))) ... ((("


if __name__ == "__main__":
    b = Bat()
    print(b.say("hello"))
    print(b.fly)


# And yet another class definition that inherits from Superhero and Bat
# superhero.py
from superhero import Superhero
from bat import Bat

# Define Batman as a child that inherits from both Superhero and Bat
class Batman(Superhero, Bat):

    def __init__(self, *args, **kwargs):
        # Typically to inherit attributes you have to call super:
        # super(Batman, self).__init__(*args, **kwargs)
        # However we are dealing with multiple inheritance here, and super()
        # only works with the next base class in the MRO list.
        # So instead we explicitly call __init__ for all ancestors.
        # The use of *args and **kwargs allows for a clean way to pass
        # arguments, with each parent "peeling a layer of the onion".
        Superhero.__init__(self, "anonymous", movie=True,
                           superpowers=["Wealthy"], *args, **kwargs)
        Bat.__init__(self, *args, can_fly=False, **kwargs)
        # override the value for the name attribute
        self.name = "Sad Affleck"

    def sing(self):
        return "nan nan nan nan nan batman!"


if __name__ == "__main__":
    sup = Batman()

    # The Method Resolution Order
    print(Batman.__mro__)     # => (<class '__main__.Batman'>,
                              # => <class 'superhero.Superhero'>,
                              # => <class 'human.Human'>,
                              # => <class 'bat.Bat'>, <class 'object'>)

    # Calls parent method but uses its own class attribute
    print(sup.get_species())  # => Superhuman

    # Calls overridden method
    print(sup.sing())         # => nan nan nan nan nan batman!

    # Calls method from Human, because inheritance order matters
    sup.say("I agree")        # => Sad Affleck: I agree

    # Call method that exists only in 2nd ancestor
    print(sup.sonar())        # => ))) ... (((

    # Inherited class attribute
    sup.age = 100
    print(sup.age)            # => 100

    # Inherited attribute from 2nd ancestor whose default value was overridden.
    print("Can I fly? " + str(sup.fly))  # => Can I fly? False


####################################################
## 7. Advanced
####################################################

# Generators help you make lazy code.
def double_numbers(iterable):
    for i in iterable:
        yield i + i

# Generators are memory-efficient because they only load the data needed to
# process the next value in the iterable. This allows them to perform
# operations on otherwise prohibitively large value ranges.
# NOTE: `range` replaces `xrange` in Python 3.
for i in double_numbers(range(1, 900000000)):  # `range` is a generator.
    print(i)
    if i >= 30:
        break

# Just as you can create a list comprehension, you can create generator
# comprehensions as well.
values = (-x for x in [1,2,3,4,5])
for x in values:
    print(x)  # prints -1 -2 -3 -4 -5 to console/terminal

# You can also cast a generator comprehension directly to a list.
values = (-x for x in [1,2,3,4,5])
gen_to_list = list(values)
print(gen_to_list)  # => [-1, -2, -3, -4, -5]


# Decorators are a form of syntactic sugar.
# They make code easier to read while accomplishing clunky syntax.

# Wrappers are one type of decorator.
# They're really useful for adding logging to existing functions without needing to modify them.

def log_function(func):
    def wrapper(*args, **kwargs):
        print("Entering function", func.__name__)
        result = func(*args, **kwargs)
        print("Exiting function", func.__name__)
        return result
    return wrapper

@log_function               # equivalent:
def my_function(x,y):       # def my_function(x,y):
    return x+y              #   return x+y
                            # my_function = log_function(my_function)
# The decorator @log_function tells us as we begin reading the function definition
# for my_function that this function will be wrapped with log_function.
# When function definitions are long, it can be hard to parse the non-decorated
# assignment at the end of the definition.

my_function(1,2)  # => "Entering function my_function"
                  # => "3"
                  # => "Exiting function my_function"

# But there's a problem.
# What happens if we try to get some information about my_function?

print(my_function.__name__)  # => 'wrapper'
print(my_function.__code__.co_argcount)  # => 0. The argcount is 0 because both arguments in wrapper()'s signature are optional.

# Because our decorator is equivalent to my_function = log_function(my_function)
# we've replaced information about my_function with information from wrapper

# Fix this using functools

from functools import wraps

def log_function(func):
    @wraps(func)  # this ensures docstring, function name, arguments list, etc. are all copied
                  # to the wrapped function - instead of being replaced with wrapper's info
    def wrapper(*args, **kwargs):
        print("Entering function", func.__name__)
        result = func(*args, **kwargs)
        print("Exiting function", func.__name__)
        return result
    return wrapper

@log_function
def my_function(x,y):
    return x+y

my_function(1,2)  # => "Entering function my_function"
                  # => "3"
                  # => "Exiting function my_function"

print(my_function.__name__)  # => 'my_function'
print(my_function.__code__.co_argcount)  # => 2

Free Online


Got a suggestion? A correction, perhaps? Open an Issue on the GitHub Repo, or make a pull request yourself!

Originally contributed by Louie Dinh, and updated by 76 contributors.